En W881AA Series Quick Start Guide lorex.com W482CAD_QSG_TRILINGUAL_R1.
Thank you for your purchase! How to get started with your Wi-Fi Camera W482CAD_QSG_TRILINGUAL_R1.
Safety precautions • • • • • • Read this guide carefully and keep it for future reference. Follow all instructions for safe use and handling of the product. Operate the camera within the specified temperature, humidity and voltage and use manufacturer approved accessories. Do not disassemble the camera. Do not point the camera directly at the sun or a source of intense light. Periodic cleaning may be required. Use a damp cloth only. Do not use any harsh, chemical-based cleaners.
Contents Section 1 2 3 4 5 6 7 8 9 W482CAD_QSG_TRILINGUAL_R1.
1 Package contents 2K Wi-Fi Camera (x1) Power Adapter (x1) Pre-inserted Memory Card (x1) Mounting Template (x1) 9.8 ft (3m) Weatherproof Extension Cable (x1) Mounting Plate (x1) Wall Mounting Bracket (x1) Anchors (x8) Screws (x8) Ceiling/Table Mounting Bracket (x1) Wrench (x1) Cable Clips (x4) Note: The following contents is based on 1 camera Dimensions Camera with Wall Mount • Height: 3.1” (78mm) • Width: 3.1” (78mm) • Length: 5.0” (128mm) W482CAD_QSG_TRILINGUAL_R1.
2 Overview SIDE FRONT 1 2 3 BOTTOM 4 5 6 7 8 1. Microphone 4. 9.2ft (2.8m) USB power cord 2. Warning light 5. Threaded insert (for mounting) 3. Status indicator 6. Speaker W482CAD_QSG_TRILINGUAL_R1.indd 6 9 7. MicroSD slot (card included) 8. Pairing / reset button 9.
3 Status indicator (solid) Connected to network (flashing) Ready to connect to network (solid) Factory reset (flashing) Disconnected from network (alternating) W482CAD_QSG_TRILINGUAL_R1.
4 Camera setup 1. Connect power to the camera with the provided power adapter. When you hear the chime and the status indicator is flashing green, the device is ready for setup. Optional: Connect the weatherproof extension cable to the camera's cable. 2. Download the Lorex Home app by scanning the QR code. 3. Open the Lorex Home app, and sign in or create an account. 4. Tap + in the app, then follow the in-app instructions to complete the device setup.
5 App Live View Camera settings Pause/play Viewing modes Play back recorded videos W482CAD_QSG_TRILINGUAL_R1.
6 Camera Placement • Place the camera close to your Wi-Fi router as possible. • Reduce the number of obstructive materials between the camera and the router or access point. Concrete, brick, metal and wood are the most common materials in your house that can cause poor signal strength. • Other electronic devices such as microwaves, TVs, cordless phones, and baby monitors can cause signal interference. It is recommended to install the camera as far away from these devices as possible.
7 Optimize Motion Detection Distance Optimal accuracy for objects within 5ft to 50ft (1.5~15m). Angle Angle the camera around 30°-60° down from the level position. Height Install the camera between 8-16ft (2.5~5m) off of the ground. Levelled to the ground 8~16 ft 5~50 ft Note: Accuracy of person detection will be influenced by multiple factors, such as the person’s distance from the camera, the height of the person, and the height and angle of the camera.
8 Wall Mounting Camera Wall mounting bracket Anchors (Optional) Mounting surface Screws Adjustable nut Mounting plate Mounting template To wall mount the camera: 1. Place the mounting template onto the desired location. Note: Ensure an outlet is nearby, and keep in mind the cable lengths. 2. Using a 15/64" (6mm) drill bit, drill 2 holes over the triangle symbols on the template. Optional: Drill 15/64” (6mm) holes for the anchors. W482CAD_QSG_TRILINGUAL_R1.
3. Align the arrows of the mounting plate and template. Using a screwdriver and the provided screws, secure the mounting plate to the surface. 4. Align the arrows between the wall mounting bracket and plate. Push the bracket in to install, then slide down to lock in place. You will hear a ‘click’ when the bracket is installed. 5. Attach the camera to the mounting bracket using the threaded insert at the rear of the camera.
9 Ceiling Mounting Mounting surface Mounting template Ceiling/table mounting bracket Anchors (Optional) Screws Adjustable ring Adjustable nut Camera To ceiling mount the camera: 1. Place the mounting template onto the desired location. Note: Ensure an outlet is nearby, and keep in mind the cable lengths. 2. Using a 15/64" (6mm) drill bit, drill 4 holes over the X symbols on the template. Optional: Drill 15/64” (6mm) holes for the anchors. W482CAD_QSG_TRILINGUAL_R1.
3. Remove the 4 pre-inserted plugs from the ceiling/ table mounting bracket. 4. Attach the camera to the ceiling/table mounting bracket using the threaded insert at the rear of the camera. Rotate the camera clockwise until attached, then use the wrench to tighten the adjustable nut in place. 5. Place the bracket over the drilled holes. Using a screwdriver and the provided screws, secure the bracket to the surface. 6.
Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
The user manual for local area network devices shall contain instructions related to the restrictions mentioned in the above sections, namely that: (i) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit; and (ii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate.
Need help? Visit help.lorex.com for up-to-date information and resources: • Download product guides • Watch how-to-videos • Find related troubleshooting tips & FAQs Register your product Please see our full Terms of Service and Limited Hardware Warranty Policy visit, lorex.com/warranty. This device complies with part 15 of the FCC Rules.
