Video Surveillance System with 4 Indoor/Outdoor Night Vision Cameras Instruction Manual English Version 1.0 MODEL: SHS-4SM www.lorexcctv.com Copyright © 2006 LOREX Technology Inc.
Thank you for purchasing the SHS-4SM. Lorex is committed to providing our customers with a high quality, reliable security product. The SHS-4SM Video Surveillance System with 4 Indoor/Outdoor Night Vision Cameras is easy to set up (connects to any TV, VCR or Monitor) making this security system perfect for protecting your home, family and personal property.
Important Safeguards Important Safeguards In addition to the careful attention devoted to quality standards in the manufacture process of your video product, safety is a major factor in the design of every instrument. However, safety is your responsibility too. This sheet lists important information that will help to assure your enjoyment and proper use of the video product and accessory equipment. Please read them carefully before operating and using your video product. Installation 1.
Important Safeguards Service Use 13. Servicing - Do not attempt to service this video equipment yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 19. Cleaning - Unplug the video product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 14.
General Precautions NOTE This equipment has been certified and found to comply with the limits regulated by FCC, EMC, and LVD. Therefore, it is designated to provide reasonable protection against interference and will not cause interference with other appliance usage.
SHS-4SM FEATURES SHS-4SM FEATURES • 4 Channel camera switcher • Automatic/Manual switch over four channels • PIR Motion Sensor alarm function • Adjustable autoscan dwell time for 2s, 5s and 10s • Adjustable alarm time from 5 - 30 s • 6 pin mini DIN input for any LOREX CMOS/CCD observation camera • Easy Setup (connects to any TV, VCR or Monitor) makes this security system perfect for protecting your home, family and personal property • PIR Motion Sensor feature notifies you when motion is detected through t
Table of Contents Table of Contents Important Safeguards ............................................................................... 3 General Precautions ................................................................................. 5 SHS-4SM Features ................................................................................... 6 Table Of Contents ..................................................................................... 7 Getting Started ...........................................
Getting Started Getting Started The SHS-4SM comes with the following components: 4-Channel Camera Switcher 4 x Weatherproof Color Day/Night IR Cameras AV Cable 4 x 57’ DIN Extension Cables Swticher Power Adapter CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED THE COMPLETE SYSTEM, INCLUDING ALL COMPONENTS SHOWN ABOVE.
SHS-4SM - Front View SHS-4SM - Front View 1 2 3 4 5 1. GREEN LED INDICATORS - Four green LED indicators display the current active camera (corresponding to the rear DIN inputs CAM1-CAM4).’ 2. AUTO/MANUAL SCAN BUTTON - Scans through the available cameras. When the switcher is initially powered on, the scan type is set to AUTO and will cycle through all available cameras (CAM1-CAM4), displaying one image at a time.
SHS-4SM - Front View SHS-4SM - Front View 1 2 3 4 5 3. CAM SELECT BUTTON - Manually changes the camera view between available channels. If a channel is empty (a camera is not connected), then the switcher will move to the next detected channel (i.e. Cameras are connected on channels 2 and 3. If the switcher is displaying CAM3 and the CAM SELECT button is pressed, the switcher will skip over CAM4 and CAM1 as there are no cameras connected, and will display CAM2). 4.
SHS-4SM - Rear View SHS-4SM - Rear View 1 2 3 1. CAM OUT - Connects the switcher to a TV, Monitor or VCR using the supplied A/V Cable. Connect the DIN end of the cable to the SHS-4SM switcher, and the Yellow Video and White Audio plugs to the corresponding terminal on the TV. 2. DC 15V - Connects the 15V DC Power adapter 3. CAM1 - CAM4 DIN INPUTS - Connection ports for up to 4 DIN Cameras. DIN type cameras draw their power from the switcher - a separate power adaptor is not needed for these cameras.
SHS-4SM Cameras SHS-4SM Cameras The SHS-4SM switcher includes 4 CCD Color IR Day/Night Indoor/Outdoor Cameras* INFRA-RED LEDs Provides illumination for low light conditions CAMERA LENS MICROPHONE Picks up sound near the camera and transmits to the SHS-4SM switcher PIR (MOTION) Detects motion and sends a signal to the SHS-4SM switcher to switch to the detected camera.
Camera Installation Camera Installation Before you install the camera, carefully plan where and how you will position the camera, and where you will route the cable that connects the camera to the SHS-4SM switcher. Installation Warnings: • Select a location for the camera that provides a clear view of the area you want to monitor, which is free from dust, and is not in line-of-sight to a strong light source or direct sunlight.
Camera Installation Connecting Cameras 1. Connect the female end of the supplied 57’ extension’ cable to the camera. NOTE: Confirm that the arrows on the DIN Camera Cable and the DIN Extension cable are pointed together when connecting the cable. If the pins in the DIN Cable are bent, the Camera will NOT function. 2. Connect the male end of the supplied 65’ extension cable to an open DIN camera input on the back of the SHS-4SM switcher. Continue connecting additional DIN cameras.
Connecting the SHS-4SM A/V Cable Connecting the SHS-4SM A/V Cable Connect the DIN end of the A/V Cable to the SHS-4SM Switcher. Connect the RCA Video and Audio cables to the TV, VCR or Monitor. TV / VCR / MONITOR Connect the Yellow AV Cable end to an available video port, and the white AV Cable end to an available audio port.
SHS-4SM System Specifications - Appendix #1 SHS-4SM System Specifications - Appendix #1 Control Box Specifications Channels 4 Alarm Time 5 to 30 seconds Scan Time 2, 5 or 10 seconds Operating Voltage 15V DC 800mA Camera Input 4 DIN AV Output 1 DIN Camera Specifications Image Sensor Color CCD Input Voltage 12V DC Lens Angle 70° (Diagonal) Resolution 380 TV Lines Minimum Illumination 1 LUX IR LED Off 0 LUX IR LED On IR LEDs 850nm Operating Temperature 14°F ~ 113° F (-10° C ~ 45° C)
Connecting the SHS-4SM A/V Cable Connecting the SHS-4SM A/V Cable Connect the DIN end of the A/V Cable to the SHS-4SM Switcher. Connect the RCA Video and Audio cables to the TV, VCR or Monitor. TV / VCR / MONITOR Connect the Yellow AV Cable end to an available video port, and the white AV Cable end to an available audio port.
