4 Camera Video Surveillance System with Multi Camera Viewing Instruction Manual English Version 1.0 MODEL: SHS-4QM2 www.lorexcctv.com Copyright © 2006 LOREX Technology Inc.
Thank you for purchasing the SHS-4QM2. Lorex is committed to providing our customers with a high quality, reliable security product. The SHS-4QM2 Video Surveillance System with 4 Indoor/Outdoor Cameras (2x Night Vision / 2x Daylight Only) is easy to set up (connects to any TV, VCR or Monitor) making this security system perfect for protecting your home, family and personal property.
Important Safeguards Important Safeguards In addition to the careful attention devoted to quality standards in the manufacture process of your video product, safety is a major factor in the design of every instrument. However, safety is your responsibility too. This sheet lists important information that will help to assure your enjoyment and proper use of the video product and accessory equipment. Please read them carefully before operating and using your video product. Installation 1.
Important Safeguards Service Use 13. Servicing - Do not attempt to service this video equipment yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 19. Cleaning - Unplug the video product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 14.
General Precautions NOTE This equipment has been certified and found to comply with the limits regulated by FCC, EMC, and LVD. Therefore, it is designated to provide reasonable protection against interference and will not cause interference with other appliance usage.
SHS-4QM2 FEATURES SHS-4QM2 FEATURES • Indoor/Outdoor, Weather Resistant Color Cameras • IR illumination provides night vision up to 5 meters (on 2 Night Vision Cameras only) • Support various display modes: QUAD Split Mode, Full Screen Mode, PIP Screen Mode. • System with remote control for easy operation.
Table of Contents Table of Contents Important Safeguards ............................................................................ 3-4 General Precautions ................................................................................. 5 SHS-4QM2 Features ................................................................................ 6 Table of Contents ...................................................................................... 7 Getting Started .............................................
Getting Started Getting Started The SHS-4QM2 comes with the following components: Quad Processor / Switcher 2 x Weatherproof Color Cameras with Stands DIN Video Cable 2 x Weatherproof Color Day/Night IR Cameras with Stands Remote Control 4 x 60’ DIN Extension Cables Swticher Power Adapter CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED THE COMPLETE SYSTEM, INCLUDING ALL COMPONENTS SHOWN ABOVE.
SHS-4QM2 - Front View SHS-4QM2 - Front View 1 2 3 4 5 6 7 8 9 1. LED INDICATORS: • POWER - Indicates the Power Status (On/OFF) • ZOOM - Indicates the system is in ZOOM Mode. • FREEZE/AUTO - Indicates the system is in FREEZE/AUTO SEQUENCE Mode. 2. CHANNEL 1 / UP BUTTON • Changes the view to CAM 1 in Viewing Mode. • Navigates UP in MENU Mode. 3. CHANNEL 2 / DOWN BUTTON • Changes the view to CAM 2 in Viewing Mode. • Navigates DOWN in MENU Mode. 4. IR RECEIVER - Infrared receiver for Remote Control.
SHS-4QM2 - Front View SHS-4QM2 - Front View 1 2 3 4 5 6 7 8 9 6. CHANNEL 4 / RIGHT BUTTON • Changes the view to CAM 4 in Viewing Mode. • Navigates RIGHT in MENU Mode. 7. QUAD / MENU / ESC BUTTON • Changes the view to QUAD in Viewing Mode. • Press and hold for 3 seconds to Enter or Exit MENU mode. 8. FREEZE / AUTOSCAN BUTTON • Press and briefly hold to freeze the onscreen image. Press the FREEZE button again to return to regular viewing.
SHS-4QM2 - Rear View SHS-4QM2 - Rear View 1 2 3 1. DIN OUTPUT - Connects the DIN Video cable to a TV/Monitor. 2. CAM1 - CAM4 DIN INPUTS - Camera inputs (for cameras with 4 pin DIN connection). . 3.
Remote Control Remote Control Listed below is a quick reference for the Remote Control. For details on specific features, refer to the Menu Setup on page #. MENU BUTTON Enters Menu Setup NAVIGATION / ENTER The NAVIGATION / ENTER BUTTONS are used to move Left / Right / Up / Down. FRZ BUTTON Press the FRZ button to Freeze a full screen camera display. Press the FRZ button to unfreeze the current display. ZOOM BUTTON Press to Zoom in the current display.
SHS-4QM2 Cameras SHS-4QM2 Cameras The SHS-4QM2 Quad Switcher / Processor includes 4 CCD Color Indoor/Outdoor Cameras* (2x Night Vision / 2x Daylight Cameras Only.
Camera Installation Camera Installation Before you install the camera, carefully plan where and how you will position the camera, and where you will route the cable that connects the camera to the SHS-4QM2. Installation Warnings: • Select a location for the camera that provides a clear view of the area you want to monitor, which is free from dust, and is not in line-of-sight to a strong light source or direct sunlight.
Camera Installation Connecting Cameras 1. Connect the female end of the supplied 60’ extension’ cable to the camera. NOTE: Confirm that the arrows on the DIN Camera Cable and the DIN Extension cable are pointed together when connecting the cable. If the pins in the DIN Cable are bent, the Camera will NOT function. 2. Connect the male end of the supplied 60’ extension cable to an open DIN channel on the back of the SHS-4QM2. Continue connecting additional DIN cameras.
Connecting the SHS-4QM2 Video Cable Connecting the SHS-4QM2 Video Cable Connect the DIN end of the Video Cable to the SHS-4QM2. Connect the RCA VIdeo cable to the TV, VCR or Monitor. TV / VCR / MONITOR Connect the Yellow Video Cable to an available video.
Menu Setup Menu Setup • Press the MENU button for 3 seconds to enter Menu Mode. • Press the ⇐ ⇑ ⇒ ⇓ buttons to navigate within the Menu and choose the desired selection. • Press the OK Button to accept the selection (labelled as ENTER in menu options) • Press the MENU button to Exit the Menu Setup.
Menu Setup DISPLAY SETUP Display Setup DISPLAY ONSCREEN: . TITLE . DATE . TIME • DISPLAY ONSCREEN - Press the ⇑ ⇐ ⇒ ⇓ buttons to navigate to the desired selection. Press the enter button to set the Display Options for Title, Date and Time to ON/OFF. • SCREEN POSITION - Changes the position of the screen. Press the ⇑ ⇓ buttons to navigate, and press the ⇐ ⇒ buttons to adjust the setting. • BORDER COLOR - Sets the Border Color to Black, Grey 1, Grey 2, White or Off.
Menu Setup CAMERA SETUP Camera Setup CAMERA 1 • SWITCH BETWEEN CAMERAS - Use the ⇐ ⇒ buttons to switch between CAMERA 1~4. • TITLE - Sets the name for the individual Camera. Press the ⇑ ⇓ buttons to navigate, and press the ⇐ ⇒ buttons to select a character (A-Z, 0-9). • TITLE: CAMERA01 BRIGHTNESS: 0 CONTRAST: 0 SATURATION: 0 HUE: 0 SHARPNESS: 0 MIRRORING: OFF ⇑⇓ SELECT ⇐ ⇒ ADJUST MENU EXIT BRIGHTNESS / CONTRAST / SATURATION / HUE / SHARPNESS Individual camera display settings.
Menu Setup MOTION SETUP Motion Setup CAMERA 1 DETECTION TIME ALWAYS ON ON: 00:00 OFF: 13:00 SENSITIVITY: 0 VELOCITY: 0 MASKING AREA X,Y (00,00) • SENSITIVITY - Sets the Motion Sensitivity. Press the ⇑ ⇓ buttons to navigate, and press the ⇐ ⇒ buttons to set the values (min~max). • VELOCITY - Sets the Motion Velocity. Press the ⇑ ⇓ buttons to navigate, and press the ⇐ ⇒ buttons to set the values (min~max).
Menu Setup Event Report • 6 Pages of EVENT REPORTS are available.
SHS-4QM2 System Specifications - Appendix #1 SHS-4QM2 System Specifications - Appendix #1 Control Box Specifications Channel Scan Period 1~99 Seconds (adjustable) Video Format NTSC/PAL Current Consumption < 1000 mA Power Supply 12V DC 1500mA Video Input 4 DIN AV Output 1 DIN Camera Specifications Image Sensor 1/4” Color CCD Pixels 512 (H) x 492 (V) NTSC Video Format NTSC Horizontal Resolution 380 TV Lines Minimum Illumination 1 LUX F1.2 Electric Shutter Speed 1/60~1/100,000 sec.
It’s all on the web Product Information Specification Sheets User Manuals Software Upgrades Quick Start Guides Firmware Upgrades VISIT www.lorexcctv.com wwwlorexcctv.com Lorex Technology Inc.
