2.4 GHz Wireless B&W Video Security System with 1 camera Instruction Manual English Version1.0 MODEL: SG6331P www.lorexinternational.com Copyright © 2006 Lorex Technology Inc.
CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. ! CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Explanation of two Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage“ within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
SAFETY INSTRUCTIONS IMPORTANT SAFEGUARDS All the safety and operating instructions should be read before the Appliance is operated and retained for future reference. 1. HEED WARNINGS - All warnings on the appliance and in the operating instructions should be adhered to. 2. FOLLOW INSTRUCTIONS - All operating instructions should be followed. 3. WATER AND MOISTURE - Do not use this video product near water – for example, a bath tub, wash bowl, kitchen sink, laundry tub or swimming pool, or in a wet basement.
TABLE OF CONTENTS PAGE INTRODUCTION & FEATURES……………………………………… 1 SYSTEM INCLUDES………………………………………………….. 2 CONTROLS AND FUNCTIONS Monitor …....................................….……………………..……... Camera ...….……………..............................……….……...…… 3 4 INSTALLATION Camera ......................................................……………….….... Monitor .....................................................................………...... 5 6 SYSTEM OPERATION Additional camera connection…………………………………….
INTRODUCTION: Thank you for purchasing the 2.4 GHz Wireless B&W Video System. This is an ideal solution for monitoring your business or home, or for safeguarding your valuables. The package contains a 5.5” B&W Monitor, and 1 wireless B&W camera. The system allows you to automatically scan between locations with the convenience of connecting up to 4 cameras (additional cameras sold separately). Use the Listen-in Audio feature to pick up sound within a specific location.
SYSTEM INCLUDES: 5.5” – 2.4 GHz B&W Monitor Owner’s Manual 1 - 2.4 GHz B&W Wireless Camera with camera stand & screws Also includes: 1 – 9V DC 500mA Adapter (Camera) with battery option (4 “AA”, not included) 1 – 13.
MONITOR CONTROLS – FRONT & BACK PANEL MONITOR FRONT VIEW MONITOR BACK VIEW 2 1 10 3 9 4 5 6 7 8 11 12 13 14 Location of Receiver Monitor controls 1. 2.4GHz Antenna - High gain dipole patch antenna receives audio and video signal from the camera. 2. CRT - 5.5” Diagonal Screen 3. Brightness Control – Allows you to adjust the brightness of the picture 4. Channel Selector - Switches between channel 1-4 / AUTO selection. 5.
CAMERA CONTROLS Back View Front/Side View 4 9 8 3 5 2 1 6 7 1. Microphone – Built-in condenser microphone provides listen-in audio capability from camera to monitor 2. Lens – B&W CMOS Image Sensor 3. 6 Infrared LED’s – Enhances the picture quality in low light conditions 4. Channel Selector Switch – Slide switch for channels 1-4 5. ON/OFF Power Switch – Controls power to the camera. Note: Please ensure that you set the switch to the OFF position before plugging the AC adapter into the unit 6.
CAMERA INSTALLATION NOTE Ensure the power switch on the monitor and camera are set to the OFF position before proceeding with the following steps. To 9V Power Adapter 1. Attach the stand base to the wall or ceiling where you want to install the camera. Locate a wall stud or ceiling, and secure the bracket using the four supplied screws. 2. Attach the camera to the stand and firmly tighten the swivel. 3.
MONITOR INSTALLATION 13.8V 1.0 A AC Adapter DC INPUT Jack 1. Connect the supplied 13.8V AC adapter to the DC INPUT JACK at the rear of the receiver monitor and plug it into an electrical outlet. BATTERY CASE & COMPARTMENT Remove the battery case by unscrewing the bolt at the bottom of the monitor and sliding the battery case out. This system requires 10 ‘C’ sized batteries (not included) Plug Your wireless monitor has both AC or battery option.
OPERATION Camera (1) Connect the power adapter to the camera power input and ensure the camera is turned “ON”. Ensure the camera is set to channel 1. Monitor (1) Connect the supplied power adaptor to the power input of the monitor. (2) Use the channel selection switch button and ensure the monitor is set to the same channel as the camera to view the picture. Note: If you experience transmission reception problems (eg.
AUTO & MANUAL VIEWING OPTIONS This system is preset to Manual mode. In Auto mode, the LED light will be ON. To manually view a specific camera location, set the Auto/Manual button to Manual. Then press the channel selector button to navigate between Channels 1-4. Set the Auto/Manual button to Auto in order to have the system automatically rotate between camera locations. AUTO SCANNING This video security system provides you the option to automatically switch between the four camera locations.
CONNECTING THE MONITOR TO A VCR FOR RECORDING Monitor VCR RCA Cables AC Adapter Connections for recording Connect the supplied audio/video cable from the back of the monitor to the Audio/Video In of the VCR. Please Note: To record, you must select the A/V or AUX channel on your VCR. Did You Know? You have the option of connecting this system to a Time Lapse VCR. A time lapse VCR provides you multiple recording options allowing you to record up to 40 days using a standard T120 tape.
OPTIONAL ACCESSORIES The following optional accessories are available to add to your existing system: Accessory Camera - Used to view other camera locations Compatible models: SG6110X, WL5210X, SG6212 from Lorex / Sylvania / Home Sentinel Time Lapse VCR - Used to record key events. Available in 40 or 1280 Hour Time Lapse VCR TROUBLESHOOTING If the system does not function properly, check the following points.
TECHNICAL SPECIFICATIONS Camera Image sensor Lens Picture Elements Scanning system Scanning frequency Sync. system Resolution Min. illuminations Video Output Gamma characteristics Auto Iris Microphone Transmitting frequency Modulation RF out level Video Output level Antenna Dimensions Battery Option Operating temperature Power source CMOS B&W 3.6mm 320 X 240 (B&W) 2:1 interlace 15.734 KHz(H) 59.94Hz (V) Internal Negative synchronization 240 Lines (B&W) 0.Lux @ F2.0 (B&W) 1.0Vp-p/75 Ohm r=0.
CARE AND MAINTENANCE: Please follow these instructions to ensure proper care and maintenance of this system Keep your monitor and camera dry. If it gets wet, wipe it dry immediately. Use and store your unit in normal temperature environment. Extreme temperatures can shorten the life of the electronic devices. Handle the monitor carefully. Dropping it can cause serious damage to the unit. Occasionally clean the unit with a damp cloth to keep it looking new.
It’s all on the web Product Information User Manuals Quick Start Guides Specification Sheets Software Upgrades Firmware Upgrades VISIT www.lorexinternational.com www.lorexinternational.com Lorex Technology Inc.
