DVR User Manual

2 CAUTIONS AND FEATURES

2.1 FEATURES

System Features:

• 21“ Color Quad with a high resolution of 450 TV lines

• Video inputs : 8 BNC inputs / 8 Mini Din inputs

• Audio inputs : 8 RCA inputs

• Video outputs : 2 Composite outputs

• Audio outputs : 2 RCA outputs

• Network (TCP/IP ) supports & RS-232 communication port

• Display Resolution : 720 x 480 pixels / Record Resolution : 720 x 240 pixels

• High Quality Picture with M-JPEG Compression Format (15~50Kbyte/Field)

• 4 Adjustable Video Quality Settings

• 4 Recording modes: Manual / Alarm / Motion / Timer

• Display Frame: 30 frames/sec

• Recording Speed: 60 fields/sec

• Jog-Shuttle function supports

• USB Port for USB Memory Key Interface

• View up to 8 camera locations in real time

• Pan/ Tilt capability on Channel 1 (Pelco D Protocol)

• Single or Dual PIP / POP viewing options

• Selectable still frame in quad or full screen

• Dual Motion Sensing Alarm Function

• Remote control or main panel operation

• Security password protection

• On Screen Display and Real Time Clock Function

• Remote Control as well as Main Panel operation

•

System comes with 160GB installed Hard Drive (Supports max. 400GB)

• Viewing options: Quad, Sequential, PIP, POP, Full Screen

• Supports Pan/Tilt control (Pelco D Protocol): Channel 1 only.

• Alarm terminal block

• Triplex Mode ( Live mode, Playback mode, Recording mode )

• Firmware Update Function (via USB connection)

• Remote control or main panel operation

• Multi-voltage system 100 – 240Volts, 50 / 60 Hz

Note: MINIMUM SYSTEM REQUIREMENTS FOR NETWORK USE

1. CPU: SPEED SHOULD BE 1.0GHZ or more

2. RAM: 256 MB RAM or more

3. Operating System: Windows 2000/ XP

4. Video card (stand alone): 32 MB

5. Hard Disk: 10 MB (free space for software installation)

6. Network card: 10 base T