User's Manual

Help

6. HELP

No video displayed on the monitor

• Ensure the camera(s) is plugged into a power outlet and is powered on.

• Ensure the monitor is powered on.

1. If the power LED is off:

• Press and hold the Power button on the top of the monitor for

3 seconds to power on the monitor.

• Recharge the monitor battery.

2. If the power LED is on:

• The monitor is in Sleep Mode. Press the VIDEO button to turn on the

screen.

• The monitor is in Voice Trigger mode. Press any button to turn the

screen on.

• Reset the monitor by disconnecting the power adapter and removing

the battery. Then re-insert the battery.

The camera and monitor are not detecting each other

• Ensure you have selected the correct camera channel. Press the CAM

button to switch channels.

• Make sure the camera is plugged in.

• Make sure the camera is powered on.

• The camera and monitor may be out of range. Move the monitor and

camera closer together.

• You may need to pair the camera and the monitor again. See “Pairing

Up Cameras” on page 18 for details.