User's Manual

16
Using The Handheld Monitor
4.9 SLEEP MODE (AUDIO ONLY MODE)
Sleep Mode allows the monitor display to
be turned off while continuing audio
monitoring. This is also a great way to
conserve battery life.
Press VIDEO button to
enter / exit Sleep Mode
To enter Sleep Mode:
Press the VIDEO button at the top of the
monitor. The monitor turns off the screen
but will continue to play audio from the
selected camera.
Press the VIDEO button again to exit Sleep Mode.
Note: Voice Trigger mode will not work when Sleep Mode is activated.
The screen will remain off until the VIDEO button is pressed.
4.10 ADJUSTING SCAN DURATION
By default, Scan View switches cameras every 5 seconds. You can adjust
this time to a number of pre-set options.
To change the time cameras will be shown before switching:
1. Press the MENU butt
on.
2. Use the

buttons to until SCAN
DURATION is shown and press OK.
3. Use the

buttons to select the
amount of time you would like cameras to
be shown before switching.
4. Press OK to
save your changes and press MENU to return to viewing.