User's Manual

15
Using The Handheld Monitor
English
4.8 VOICE TRIGGER (AUDIO ACTIVATED ALERTS)
In Voice Trigger mode, the monitor goes into standby. When sound is
detected by the camera at the preset audio level, the monitor's screen
instantly turns on. This conserves battery power, and alerts you only
when needed.
To turn on Voice Trigger and set the sensitivity
lev
el:
Recommended level
High
Low
Off
1. Press the MENU button.
2. Press

until VOICE TRIGGER is
shown and press OK.
3. Press

to select the volume
sensitivity. On the lowest setting, Audio
Activated Alerts are turned
off . As you turn
up the sensitivity, alerts will be activated by
quieter noises.
4. Press OK to
save your changes and MENU to return to viewing.
When Voice Trigger is enabled, a VOX icon appears in the display.
TIP: Medium sensitivity is recommended (3 bars).
NOTE: If you want softer noises to trigger the monitor (such as a faint
w
himper), set the sensitivity setting HIGHER. If you only want louder
noises to trigger the monitor (such as a loud cry), set the sensitivity
setting LOWER.