User's Manual
Table Of Contents
Pairing Additional Cameras
12
4. Use the arrow keys on the receiver to select the channel you want to pair the camera
to. Channels that are paired to an existing camera show the statement PAIR OK, while
open channels show NO PAIR. Press
OK
on the desired channel to begin pairing.
• If you pair a new camera to a channel that is already being used by an existing cam-
era, the new camera will be connected to that channel. The old camera will auto-
matically be disconnected.
5. Following the on-screen prompt (the selected channel shows the statement PAIRING),
press the Pair button behind the camera. You have 10 seconds to press the Pair but-
ton on the camera. If pairing was successful, the pairing channel shows the statement
PAIR OK.
6. Press until you have exited all menus. You can now view live video from the cam-
era by selecting the channel using the arrow keys on the receiver.
Note
• If pairing was unsuccessful, the pairing channel shows the statement TIME OUT. Repeat steps 2~5 to
try the pairing process again.
• If the speaker begins squealing, move the camera and receiver away from each other.
#LX400030; r.16602/16610; en-US
31