User's Manual

LCD Receiver Overview
7
7.1 Front Panel
OK
2
3
4
5
6
7
8
9
1
0
1
1
1
2
1
1. LCD Screen
2. Indicator LED: Indicates system status in the following ways:
• Solid green: Indicates that battery life is half-full or greater.
• Solid red: Indicates that the receiver is plugged in and turned off.
• Flashing red: Indicates that the battery is low OR, the receiver is plugged in but the
battery is not inserted.
3. Power Button: Press and hold for 2 seconds to turn the receiver on or off.
4. Menu: Press to enter the system menu.
5. Enter / Play / Pause:
• In menus, press to confirm a selection.
• In live view, press to switch the viewing mode between single channel mode, quad
mode, or scan mode. For more details on viewing modes, see CROSSREF.
• In video playback, press to play / pause video.
6. Left / Rewind: Press to move selection to the left in menus, or press and hold to re-
wind in video playback.
7. Right / Fast-Forward: Press to move selection to the right in menus, or press and hold
to fast-forward in video playback.
8. Down / Decrease Volume: Press to move selection to the down in menus, or to de-
crease volume in live view.
9. Up / Increase Volume: Press to move selection to the up in menus, or to increase vol-
ume in live view.
10. Back / Stop: Press to go back to the previous menu or to stop video playback.
11. Record / Snapshot / Delete:
• Press in live view to begin manually recording video. For full details on manual re-
cording, see CROSSREF.
• Press and hold in live view to take a snapshot. For full details on taking snapshots,
see CROSSREF.
• Press while selecting a snapshot or video in the playback menu to delete the file.
For full details on deleting snapshots, see CROSSREF. For full details on deleting
video recordings, see CROSSREF.
#LX400030; r.16602/16610; en-US
13