- Lorex Technology LCD Monitor Instruction Manual

37
Camera Menu
MOTION SENSOR
• Sensitivity - Controls the Motion
Sensitivity for the individual camera
between 1 (low) ~ 10 (high).
• Area Setup - Opens the Area Setup for
the camera:
PTZ PROPERTIES
• Channel No. - Camera Number.
• PTZ Driver - The compatible driver
selected for the PTZ Camera.
• Auto Focus - Sets the Automatic
camera focus to ON/OFF.
• Auto Iris - Sets the Automatic Shutter
to ON/OFF.
• Speed Controls - Sets the Pitch, Zoom,
Focus and Iris speeds between 1~5.
MOTION SENSOR
AREA SETUP -
- Move the Cursor by using the directional arrows
located on the Remote Control or using the Mouse.
- Press Enter to select or deselect a Region.
- Press the Return key to access the confirmation
screen.
CONFIRMATION SCREEN -
Select All - Selects all areas (BLUE SQUARES)
Deselect All - Clears all areas (GREY SQUARES)
Cancel - Cancels Area Setup
Save & Exit - Saves the settings.
Selected Areas are shaded in BLUE.
Deselected Areas are shaded in GREY.