- Lorex Technology LCD Monitor Instruction Manual

34
Display Menu
• Check or Uncheck the selected
Cameras to have the video sent to a
Secondary Monitor in Sequence.
NOTE: Any cameras NOT selected will not
be sent as video to the Spot Out Monitor.
SCREENSAVER
• Auto Brightness - Sets the length of
time before the Screen brightness is
turned down (10, 20, 30, 40 or 50
minutes, or 1 hour).
NOTE: The unit continues to function, and
pressing any key will turn the screen back
on.
• Main Display OFF - Turns the Main
Display Screen ON/OFF:
z ON - The Main Display is always ON
z OFF - The Main Display is always OFF
• FROM - Used ONLY when the Main
Display OFF setting is set to ON. Sets
the Start Time for the monitor to go into
Screen Saver mode.
• TO - Used ONLY when the Main Display
OFF setting is set to ON. Sets the End
Time for the monitor to exit from Screen
Saver mode.
SPOT-OUT
Sends the Specified camera video to a
secondary Monitor (using the Spot Out Port
on the back of the unit).
6. Press the SEQUENCE button on the
Remote or Mouse Menu to switch to
Sequence display.
5. Right click an empty spot outside of the
squares when complete. and select
SAVE & EXIT.