- Lorex Technology LCD Monitor Instruction Manual

32
Display Menu
Once the New Sequence has been created,
the Sequence Setup Mode screens appear.
These screens will set the sequence
patterns (see the following for details).
Modifying a Sequence
• An existing Sequence can be Modified
by selecting it from the list, and pressing
ENTER. Once changes have been
made, select the MODIFY button to
configure the views, then press the
SAVE Button.
1. Press the ENTER button on the Remote.
The Highlight will change to YELLOW -
Setup Mode is now active.
SEQUENCE SETUP - REMOTE
2. Select the Display Mode by pressing the
Left and Right buttons (5 different Display
Options - Single, Quad, 6-split, 8-split &
8-quad).
3. Press the Number Keys to Select
channels to be displayed in Sequence (all
squares must have an assigned number).
Press ENTER when complete.
4. Repeat for the next Display Modes (up to
16 additions).