- Lorex Technology LCD Monitor Instruction Manual

19
Camera Installation
Connecting BNC Cameras
1. Connect the Extension cable to the Camera and System:
A. Connect the Barrel Power connector to a power
adaptor.
B. Connect the BNC connector to an available BNC
Port of the System.
C. Connect the Male Power connector to the Camera.
D. Connect the BNC connector to the Camera.
2. Connect the Power Adaptor to a wall outlet.
IMPORTANT NOTE: The ends of the extension cable are NOT the same - one end has a Male
power port, and the other has a Female power port. Before permanently running the Camera
Extension Cable, make sure that the cable has been oriented between the Camera and the unit
correctly.
Camera Connection Diagram
Male Power Port - The
male power port end of the
Extension cable connects to
the Camera.
Female Power Port - The
female power port end of
the Extension cable con-
nects to the Power Adaptor.