- Lorex Technology Router Brochure

Page 23
A Guide to Port Forwarding Your Router
Information in this document is subject to change without notice. As our products are subject to continuous improvement, Lorex Technology and our subsidiaries
reserve the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE © 2006 LOREX. All rights reserved.
WWW.LOREXCCTV.COM
port forwarding – netopia router
The port forwarding process may vary depending on the brand and model number of the router
being used. Port forwarding of a router is required to allow user access to your network device.
Regardless of the Netopia being used, the process of port forwarding is similar. You will need
to enable the ports by locating the port range forwarding screen. The set up instruction outlined
below is an example of port forwarding a Netopia Router using Netopia Model 3346.
Step 1:
Open your web browser.
Enter the router IP address 192.168.62.1 in the address bar as shown below, followed by pressing
Enter.
http://192.168.62.1http://192.168.62.1
Step 2:
Enter ‘admin’ in the User Name and ‘1234’ in the Password dialog box followed by ‘OK’ to enter
the Netopia configuration page.
Source: Portforwarding.com
admin
1234
admin
1234
http://192.168.62.1
admin
1234