User's Manual

22
Troubleshooting
Problem Solution
No video displayed on
the monitor
• Press and hold the
button
to power on the monitor.
• Monitor is out of batteries. Plug
in the monitor power adapter.
• Video Off or VOX mode is on.
Press any button to turn the
screen back on.
• The channel has been disabled.
See “Changing Channels” on
page 8 for details.
Monitor screen keeps
turning off
• VOX mode is on.
See “Using
VOX Mode (Voice Trigger)”
on page 17
for details on
disabling VOX mode.
• The monitor battery is low. Plug
in the monitor power adapter
The camera is not
detected; “Out of Range”
is shown on the monitor
• Wrong channel selected. Press
repeatedly to select the
channel.
• Make sure the camera is
powered on.
• The camera and monitor may
be out of range. Extend the
antenna on the monitor or move
the monitor and camera closer
together.
• You may need to pair the
camera and the monitor
again. See “Pairing Additional
Cameras” on page 19 for
details.
Feedback / squealing
noise coming from the
monitor
• Your camera and monitor may
be too close to each other.
Move them further apart.
• Press
to lower the monitor
volume.
• For optimal performance, avoid
placing the monitor and camera
near televisions, computers,
cordless/mobile phones, or
other electrical equipment.
Product Support is available 24/7 including product
information, user guides, quick start guides, and FAQ’s at
www.lorexbaby.com/support.
Need Help?