User's Manual

If you wish to only monitor some of your cameras
using Scan mode, you may choose to hide
certain channels. Hidden channels will not be
shown in Scan mode.
C1
8
Press to change the
checkmark to an X. This
will disable video from
the channel and remove it
from the viewing cycle in
Scan mode.
Press to include it
again.
2
C1
Press to cycle through
connected cameras to
the channel you wish to
show or hide.
9
1
By default, each channel name has a checkmark
beside it, which means it is enabled for monitoring
and included in the viewing cycle on Scan mode.
10
To show / hide channels in Scan mode: