Operation Manual

95
User Manual
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "SIMULATION" + 'ENTER' +
"ACTIVATE SIMULATION" + 'ENTER'
To turn On the Simulation select Off. The default setting is Off.
5.6.2 SPEED
To start the simulator you can insert the Speed value. Using the cursor key select
the preferred Speed and press 'ENTER'. The default setting is 01.0 Kts.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "SIMULATION" + 'ENTER' +
"SPEED" + 'ENTER'
5.6.3 HEADING
To start the simulator you can insert the Heading value. Using the cursor key select
the preferred Heading and press 'ENTER'. The default setting is 000° M.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "SIMULATION" + 'ENTER' +
"HEADING" + 'ENTER'
5.6.4 DATE AND TIME
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "SIMULATION" + 'ENTER' +
"DATE" + 'ENTER'
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "SIMULATION" + 'ENTER' +
"TIME" + 'ENTER'
Using the cursor key insert the preferred Date and Time and press 'ENTER'.
5.6.5 CURSOR CONTROL
Enables (On)/disables (Off) the cursor control. The default setting is Off.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "SIMULATION" + 'ENTER' +
"CURSOR CONTROL" + 'ENTER'
5.7 AIS MENU
AIS is an Automatic Identification System. It has been introduced to improve the
safety of navigation by assisting in the efficient operation of ship-to ship, ship reporting
and VTS applications. The system should enable operators to obtain information from the
ship automatically, requiring a minimum of involvement of ship’s personnel, and should
have a high level of availability. AIS transponders installed on IMO vessels use VHF fre-
quencies to: