Operation Manual

91
User Manual
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "NAVIGATE" + 'ENTER' +
"FIX DATUM" + 'ENTER'
5.3.3 MAP DATUM
Allows selecting any Geodetic Datum reference from the over 100 available on the
chart plotter. Map Datum selection switches to the selected reference datum applying the datum
offsets stored with the charts. WGS 1984 is the default Map Datum.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "NAVIGATE" + 'ENTER' +
"MAP DATUM" + 'ENTER'
5.3.4 ORIENTATION RESOLUTION
Selects the orientation of your chart according to your personal needs (see Par.
3.5.1.3 for more information). The Orientation Resolution is the resolution angle for the
Map Orientation, range [5°, 60°] . The default setting is 10°.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "NAVIGATE" + 'ENTER' +
"ORIENT. RESOLUTION" + 'ENTER'
5.3.5 ROLL ROAD SCALE
Sets you preferred Rolling Road Scale among 0.2, 0.5, 1.0, 2.0, 4.0, 10.0. The default
setting is 0.2.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "NAVIGATE" + 'ENTER' +
"ROLL ROAD SCALE" + 'ENTER'
5.3.6 RESET PARTIAL AND TOTAL TRIP
Resets the partial or total distance travelled by the ship from the first activation of
the chart plotter or starting from the values reset. The partial or total trip value is shown on
the top of the Navigation Data page.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "NAVIGATE" + 'ENTER' +
"RESET PARTIAL TRIP" + 'ENTER'
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "NAVIGATE" + 'ENTER' +
"RESET TOTAL TRIP" + 'ENTER'
5.4 COMPASS
The Compass menu sets the desired value for Bearing and Magnetic Variation, and
selects the Calibration page.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "COMPASS" + 'ENTER'