Operation Manual

User Manual

5.2.1 FIX CORRECTION

Turns On/Off the Correction from the positioning system. If the new Correction

is calculated, but the Correction is not enabled, the ship's position is not changed. The

default setting is Off.

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "FIX" + 'ENTER' + "FIX COR-

RECTION" + 'ENTER'

5.2.2 COMPUTE CORRECTION

Corrects fixes from the positioning instrument. By placing the cursor on the ship's

real position and selecting this option, the error is calculated and internally memorized for

appropriate correction, but not applied.

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "FIX" + 'ENTER' + "COMPUTE

CORRECTION" + 'ENTER'

5.2.3 CORRECTION OFFSET

Manual correction of fix position.

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "FIX" + 'ENTER' +

"CORRECTION OFFSET" + 'ENTER'

Insert the preferred value and press 'ENTER'.

5.2.4 POSITION FILTER

Turns On/Off the Position Filter. In case of a jittering fix this option makes the

ship' position more stable and the track smoother. The default setting is Off.

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "FIX" + 'ENTER' + "POSITION

FILTER" + 'ENTER'

5.2.5 SPEED FILTER

Turns On/Off the Speed Filter. When it is On, you can filter the speed of the ship,

to optimize it. The default setting is Off.

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "FIX" + 'ENTER' + "SPEED

FILTER" + 'ENTER'

5.2.6 FILTER DUMP

Inserts the value for the Filter in the range [500 - 12000]. The default setting is 500.

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "FIX" + 'ENTER' + "FILTER

DUMP" + 'ENTER'