Operation Manual

85
User Manual
4.7.1.7 Route Data Report
When the Navigation to the External Route is received, it will be possible to display
the information related to the External Route by entering the Route Data Report.
Fig. 4.7.1.7 - External route on Route Data Report
• External Route : name of the External Route (from PCMPN,0)
• Cruising Speed : planned cruising speed (from PCMPN,1)
• Fuel Consumption Rate : planned fuel consumption rate (from PCMPN,1)
• Total Route length Route : length from first to last Wpt (from PCMPN,1)
• Initial Fuel Load : volume of fuel available before the navigation was
started (liters)
• Total Fuel Consumption : calculated fuel consumption to navigate the whole
Route
• Waypoints in Route : No. of Wpts in the Route (from PCMPN,1)
• Remaining Waypoints : No. of Wpts from Destination to last Wpt (from
PCMPN,1)
• Distance to Destination : distance from ship to Destination (calculated)
• Distance to Next Wpt : distance to travel from ship to the Wpt after the des-
tination (calculated: Distance to Dest + Next Route
Leg length)
• Distance to Last Wpt : distance to travel from ship to the end of the Route
(calculated: Distance to Dest +Distance from Dest
to last Wpt received from PCMPN,1)
• TTG To Destination : estimated time to travel the “Distance to Last Wpt”.
Calculated using Cruising Speed.
• TTG To Next Wpt : estimated time to travel the “Distance to Next Waypoint”.
Calculated using Cruising Speed.
• TTG to Last Wpt : estimated time to travel the “Distance to Last Wpt”.
Calculated using Cruising Speed