Operation Manual

User Manual

4.4.4 SELECTING TRACK COLOR

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' +

"COLOR" + 'ENTER'

Selects the desired color among the eight colors available for the track.

4.4.5 DELETING TRACK

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' +

"DELETE" + 'ENTER'

Deletes the all track storing. After pressing 'ENTER' a warning window appears:

select "Yes" and press 'ENTER' to confirm (select "No" otherwise).

4.4.6 DELETING SELECTED TRACK

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' +

"DELETE SELECTION" + 'ENTER'

Deletes the track selected. After pressing 'ENTER' a window appears: press 'EN-

TER' to set the first point , then press 'ENTER' to set the second point. A warning window

appears: select "Yes" and press 'ENTER' to confirm the deletion (select "No" otherwise).

4.4.7 SELECTING TRACK MEMORIZING TYPE

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' + "STEP

UNIT" + 'ENTER'

Choose Distance (Dist) - the chart plotter can store a fix when the distance from its

last stored position is greater than a defined distance; Time - the chart plotter can store a fix

after a defined time; Auto - the software decides when storing a position, on the basis of the

straight or curved track. The default setting is Time.

4.4.8 SELECTING DISTANCE

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' +

"DISTANCE" + 'ENTER'

When the tracking function is On and the type of track storing is Distance, you can

store a fix when the distance from its last stored position is greater than a defined distance.

Choose in the range 0.01, 0.05, 0.1, 0.5, 1.0, 2.0, 5.0, 10.0 Nm (the distance unit is selected by

the user, see Cap. 5). The default setting is 0.01 Nm.

4.4.9 SELECTING TIME

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' + "TIME"

+ 'ENTER'