Operation Manual

User Manual

4.2.2.3 Goto

Place cursor on Event

Press 'GO-TO': a circle encloses the Event symbol. A straight line is shown on the

screen connecting the Target with the ship's position. When the Target is placed, all naviga-

tion data are referred to this Target.

4.2.2.4 Editing Event

Place cursor on Event

Press 'ENTER'. Select "EDIT" and press 'ENTER'. A window appears to modify

Name, Symbol, Color of the existing Event.

Fig. 4.2.2.4 - Edit Event

Use the cursor key to select the field. If you have selected Name field, press 'EN-

TER': use the cursor key to insert the character (8 characters max), then press 'ENTER'. If

Color field is selected press 'ENTER': a window with 8 different colors appears, use the

cursor key to select the desired color and press 'ENTER'. If Symbol field is selected press

'ENTER': a window with 16 different symbols appears. Use the cursor key to select the

symbol and press 'ENTER'. Then press 'CLEAR'.

4.2.2.5 Finding information on Events: User Points List page

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "USER POINTS" + 'ENTER'

A full window is opened showing information about all stored User Points (Marks,

Events and Waypoints). Move up/down the cursor key to select the User Point you wish. If

the page contains more than 8 User Points, the list continues in the next pages. See Par.

4.1.1.9.

4.2.2.6 Add to route

Place cursor on Event

Press 'ENTER'. Select "ADD TO ROUTE" and press 'ENTER': the selected Event

is connected to the current route. The same Event can be added in many routes.