Operation Manual

User Manual

It also possible to select the accuracy for the route check, among Very Low, Low,

Medium, High and Very High:

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' + "AC-

CURACY" + 'ENTER'

4.2 MARK & EVENT

You may place a Mark, as it is called, at your cursor position, while Event is created

at your vessel position.

4.2.1 MARKS

You may tag a location on the chart with a Mark symbol and number, which you

can record for later use. Every time you place the cursor on a Mark the following functions

are available.

4.2.1.1 Adding Mark

Select Advanced Mode + 'ENTER' + "MARK" + 'ENTER'

The new Mark appears on your cursor position. An info window containing Mark

name, symbol and Latitude/Longitude is shown.

4.2.1.2 Deleting Mark

Select Advanced Mode + Place cursor on Mark

Press 'ENTER'. Select "DELETE" and press 'ENTER': the Mark remains on the

screen shaded until the next screen is redrawn.

Note

If you try to delete a Mark that belongs to many routes, the chart plotter emits three beeps and on the screen a Warning

message appears. If you want to delete the Mark, press 'ENTER'.

4.2.1.3 Goto

Place cursor on Mark

Press 'GO-TO': a circle encloses the Mark symbol. A straight line is shown on the

screen connecting the Target with the ship's position. When the Target is placed, all naviga-

tion data are referred to this Target.

4.2.1.4 Moving Mark

Select Advanced Mode + Place cursor on Mark

Press 'ENTER'. Select "MOVE" and press 'ENTER'. Move the cursor by the cur-

sor key, a dotted line connecting the Mark with the new position is shown: