Operation Manual

70
User Manual
Fig. 4.1.2.7 - Route Data Report page
Selecting route
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' +
"ROUTE REPORT" + 'ENTER' + "ROUTE #" + 'ENTER'
Use the cursor key to select the route number and press 'ENTER'. The route, shown by
straight segments, is centered on the screen, with the cursor on the central Waypoint. See
also Par. 4.1.2.1.
Note
If there is the Target in the current route, it is not possible to change the current route. So if the "Route #" item
is selected, the chart plotter emits three beeps.
Changing Speed & Fuel values
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' +
"ROUTE REPORT" + 'ENTER'
It is possible to modify the Speed and Fuel consumption values, respectively by selecting
"SPEED" and "FUEL". Insert value by using the cursor key and pressing 'ENTER'.
Reversing route
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' +
"ROUTE REPORT" + 'ENTER' + "REVERSE" + 'ENTER'
Reversing a route plan is most typically used to return to the point where the route originally
started. See also Par. 4.1.2.3.
Deleting route
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' + "ROUTE
REPORT" + 'ENTER' + "CLEAR" + 'ENTER'
A window is opened: select "YES" and press 'ENTER' to confirm (select "NO" and press
'ENTER' otherwise). The route remains on the screen shaded until the screen is redrawn.
To delete the route see also Par. 4.1.1.4 and 4.1.2.2.
4.1.2.8 Safe Route Checking
This function checks the presence of particular cartographic objects (see the list