Operation Manual

69
User Manual
A window is opened: select "YES" and press 'ENTER' to confirm (select "NO"
and press 'ENTER' otherwise). The route remains on the screen shaded until the screen is
redrawn. To delete route see also Par. 4.1.1.4 and 4.1.2.4).
4.1.2.4 Reversing route
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' + "ROUTE
REVERSE" + 'ENTER'
Reversing a route plan is most typically used to return to the point where the route
originally started.
4.1.2.5 Route color
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' + "ROUTE
COLOR" + 'ENTER'
A window is opened: use the cursor keys to select the route color you want among
the eight colors available. Press 'ENTER' to confirm. The route appears on the screen
colored by the selected color. It is possible to select a different color for any route.
4.1.2.6 Send/Receive route
To transmit the active route information onto the NMEA output port.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' + "SEND"
+ 'ENTER'
The NMEA WPL & RTE messages are sent to the output port.
To save route information received from the NMEA input port.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' +
"RECEIVE" + 'ENTER'
The received route is saved on the active route, overwriting it. The NMEA WPL &
RTE messages are sent to the input port.
4.1.2.7 Finding information on route: Route Report
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' +
"ROUTE REPORT" + 'ENTER'
If there are more than 8 Waypoints shown, use the cursor key to select another
page.