Operation Manual

User Manual

Once you have positioned the cursor at new location, press 'ENTER' (press 'CLEAR'

to abort operation):

Fig. 4.1.1.7b - Placing Waypoint between two existing ones (III)

4.1.1.8 Editing Waypoint

Select Advanced Mode + Place cursor on Waypoint

Press 'ENTER'. Select "EDIT" and press 'ENTER' to modify a Waypoint. A win-

dow will be shown with Name, Symbol, Color and Latitude/Longitude of the Waypoint,

advising about what Waypoint data are modifiable.

Fig. 4.1.1.8 - Edit Waypoint (I)

Use the cursor key to select the field. If you have selected Name field, press 'ENTER': use the

cursor key to insert the character (8 characters max), then press 'ENTER'. If Symbol field is selected

press 'ENTER': a window with 16 different symbols appears:

Fig. 4.1.1.8a - Edit Waypoint (II): Waypoint symbols