Operation Manual

43
User Manual
• Dynamic Nav-Aids (an innovative and dynamic presentation mode)
• Flexi-Zoom (increased Under and Over Zoom between chart levels, resulting in optimal scale
display for any situation)
• Dynamic Elevation Data (optimized palettes including the NOAA color palette)
• Perspective View ("Real World" perspective view of the chart, updated real-time during
navigation)
• Smooth-Zoom (smooth transition of cartographic levels)
• Enhanced Turbo-Zoom (extra fast cartography level change displaying the most important
cartographic objects)
• Enhanced Mixing Levels (seamless data presentation)
• Off-line redraw (cartography level transition without image construction)
Cartographic Data related Features
• Guardian Alarm (automatic control and alarm over obstacles on charts in front of your boat)
• Safety Toolbar (interactive alarm system for situational awareness on screen)
• Safety Route Check (sophisticated function checking dangerous objects along your navigation
route)
MAX and NT/NT
+
C-CARD coexistence
• When NT
+
data and MAX data cover different areas, the chart plotter gets data
from both charts (depending on the current position).
• When NT
+
data and MAX data cover the same area, the chart plotter gets data only
from MAX chart.
3.5.1 MAP SETTINGS MENU
It is possible to select the Map Settings Menu following the procedure:
'MENU' + "MAP SETTINGS" +'ENTER'
3.5.1.1 3D View (Perspective View)
'MENU' + "MAP SETTINGS" +'ENTER' + "3D View" + 'ENTER'
Chart data may be projected in perspective mode during navigation. This function
allows setting the panoramic view of the chart. As the upper side of the map is more
compressed than the lower side, a wider map area is visible. The perspective view allows
showing more chart information immediately ahead and around the cursor. The default
setting is Off.