Operation Manual

36
User Manual
3.2.1 COURSE VECTOR
Disables (Off) the Course Vector or selects the preferred time among: 2, 10, 30
Min, 1 hour, 2 hours, Infinite. The default setting is Infinite.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "COURSE VECTOR" + 'ENTER'
3.2.2 SCREEN AMPLIFIER
The Screen Amplifier function allows, when it is On and Home mode is set, to
place map on the screen related to the fix position and direction, so the map shown is that
before the ship. The default setting is On.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "SCREEN AMPLIFIER" + 'ENTER'
3.2.3 ADVANCED FUNCTIONS
When it is On the chart plotter works in Advanced Mode, otherwise when it is Off
the chart plotter works in Basic Mode. The default setting is Off.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "ADVANCED FUNCTIONS" +
'ENTER'
3.2.4 USER POINTS
Selects the User Point display among On, Off or Icon. The default setting is On.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "USER POINTS" + 'ENTER'
3.2.5 DEPTH WINDOW
Enables/Disables the display on the Depth Window on the screen. The default
setting is Off.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "DEPTH WINDOW" + 'ENTER'
3.2.6 UNITS SELECTION
Allows to select the preferred unit for Distance, Speed, Depth and Altitude (alti-
tude of GPS Antenna on the medium sea level).
Speed: Kts(knots)/Mph(miles per hour)Kph(chilometres per hour). The default setting is Kts.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "SPEED" + 'ENTER'
Distance: Nm(Nautical Miles)/Sm(statute miles)Km(chilometres). The default setting is Nm.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "DISTANCE" + 'ENTER'