Operation Manual

User Manual

'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +

"VIDEO INPUT" + 'ENTER'

2.7.1 SELECT VIDEO INPUT

Selects the preferred Video Input

'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +

"VIDEO INPUT" + 'ENTER' + "SELECT VIDEO INPUT" + 'ENTER'

Available options are the following:

• None

• Full Video 1 : Shows the image from the video camera 1 at full screen.

• Full Video 1 + Video 2 Small: Shows the image from the video camera 1 at full

screen, with the image from the video camera 2 on a window which can be moved

up/down and/or right/left using the cursor key.

• Full Video 2: Shows the image from the video camera 2 at full screen.

• Full Video 2 + Video 1 Small: Shows the image from the video camera 2 at full

screen, with the image from the video camera 1 on a window which can be moved

up/down and/or right/left using the cursor key.

• PiP (Picture In Picture) Video 1: Shows the cartographic image at full screen, with

the image from the video camera 1 on a window which can be moved up/down

and/or right/left using the cursor key.

• PiP (Picture In Picture) Video 2: Shows the cartographic image at full screen, with

the image from the video camera 2 on a window which can be moved up/down

and/or right/left using the cursor key.

• Auto Switch Video 1 / Video 2: Shows the image from the video camera 1 and

from the video camera 2 at full screen alternately, after time selected in the "Switch-

ing Timeout" item (see Par. 2.7.3).

2.7.2 ACTIVATE VIDEO INPUT

Activates the Video Mode from the Video Input menu:

'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +

"VIDEO INPUT" + 'ENTER' + "ACTIVATE VIDEO INPUT" + 'ENTER'

At the activation of the Video Mode the following messages are shown on a dedi-

cated window: "Connected Video Input Signal is XXXX. The Video Mode will be acti-

vated". XXXX can be PAL or NTSC: the software automatically detects the type of Video

Input source connected. Once the Video Mode is active use the following keys to adjust

video settings: press the left side of 'POWER' to adjust the contrast and the right side of

'POWER' to adjust backlight, move the cursor up/down to adjust brightness and left/right

to adjust colors, press 'ZOOM IN'/ZOOM OUT' to adjust hue phase. Pressing any other

key exits from Video Mode.