Operation Manual

User Manual

2.6.1 INSERTING C-CARD

Hold the C-CARD by the short inclined side so that you can see the C-MAP label.

Fig. 2.6.1 - Inserting C-CARD (I)

Open the doors and gently push the C-CARD into one of the two slots; push the

C-CARD in as far as it will go to hold fixed into the slot (see left side of Fig. 2.6.1a).

Fig. 2.6.1a - Inserting C-CARD (II)

2.6.2 REMOVING C-CARD

Open the door and press lightly the C-CARD you wish to remove and move it until

you hear a click: the C-CARD will eject out of the slot (see right side of Fig. 2.6.1a).

Note

C-MAP BY JEPPESEN is continuously creating new charts and revising old ones. If you wish to receive information

on the newest available charts, you can write for the catalog of available C-MAP BY JEPPESEN C-CARD at your

dealer.

2.7 VIDEO INPUT

By accessing this menu it is possible to see images on the chart plotter display

captured from an external video signal source, if connected to the chart plotter. Allows the

"picture-in-picture" functionality, so a Video Input image can be shown on a window and

placed over the other Video Input or cartography image at full screen.