Operation Manual

20
User Manual
The key
Press 'MOB' to set MOB (Man Overboard). Press 'MOB' when the MOB is al-
ready present deletes it.
The key
Press 'CLEAR' to exit from menu or to leave a menu without making changes. In
Basic Mode deletes the A, B, C, D points, the User Point (Mark, Event, Waypoint), the
MOB, the Target identified by the cursor.
The key
Press 'ENTER' to select the desired option, to confirm selection; in Basic Mode
places A, B, C, D points on the cursor coordinates, in Advanced Mode creates Objects
(Mark, Event, Waypoint, A-B-C-D).
Note
Pressing 'ENTER' for 1 second activates the Video 1 and pressing 'CLEAR' for 1 second activates Video 2 (also
it is possible to activate the Video Mode from menu, see Video Input menu in Par. 2.7 and 2.8). Once the Video
Mode is active use the following keys to adjust video settings: press left and right side of 'POWER' to adjust the
contrast and backlight, move the cursor up/down to adjust brightness and left/right to adjust colors, press 'ZOOM
IN'/ZOOM OUT' to adjust hue phase.
The cursor key
The cursor key moves the cursor about on the display screen, quickly and accu-
rately. It also scrolls the desired option in the menu page(s). If in Navigate (Home) mode, it
allows to exit from navigate mode.
The and keys
Press 'ZOOM IN' shows more details of a smaller area, by changing the chart scale
and zooming in on your display. Press 'ZOOM OUT' to operate similarly to the 'ZOOM
IN', except in reverse, changing the scale and showing a wider, otherwise less detailed view.