Operation Manual

19
User Manual
2
Before You Begin
This chapter provides basic information to get you start using the chart plotter; it
will help you to become familiar with the chart display and the functions of the controls
before you start using the chart plotter.
2.1 THE KEYBOARD
The 'CONTRAST'/'BACKLIGHT'/'POWER' key
Press and hold the right side of 'POWER' down for 1 second to turn the chart
plotter On. Press and hold the right side of 'POWER' down (once the chart plotter has
been turned On) for 3 seconds turns the chart plotter Off.
Press and immediately release the right side of 'POWER' to adjust the backlight,
press and immediately release the left side of 'POWER' to adjust the contrast of the display.
The key
Press 'MENU' to select the Functions Menu.
The key
Place the cursor and press 'GO-TO' to set Target.
The key
Press 'PAGE' to select the page you want.
Note
Pressing 'PAGE', the Page Selection menu is shown: use the cursor key for selecting the "Video" icon and pressing
'ENTER', image from the selected Video Input is displayed (also it is possible to activate the Video Mode from
menu, see Video Input menu in Par. 2.7 and 2.8). Once the Video Mode is active use the following keys to adjust
video settings: press the left side and the right side of 'POWER' to adjust contrast and backlight; move cursor up/
down to adjust brightness and left/right to adjust colors; press 'ZOOM IN'/ZOOM OUT' to adjust hue phase.
The key
Press 'MODE' to set the Navigate mode (Home).