Operation Manual

112
User Manual
Note
Pressing 'MENU' (after exit from the OSD menu) while waiting the timeout end, allows to select the OSD menu
again.
Among the sub-menus into the OSD menu there is the Contrast/Brightness menu.
Pay attention because from this menu it is possible to adjiust only the Contrast, the Brightness
adjiust is possble only pressing 'POWER', there are 5 brightness levels wrap around.
Note
Pressing 'ENTER' while waiting the timeout end, described above, is a "short-cut" to the adjiust function.
The default settings are the following:
• Timeout OSD to max value (about 15 seconds)
• Contrast 40%
• Color Temperature 7500K