Operation Manual

111
User Manual
The World Map HD Net is controlled by using ten keys; there is also a cursor key
to move a cursor across the screen, as the World Map Pro HD. Pressing any key on the
Remote Monitor keyboard acts as the operation is made on the Master Chart Plotter key-
board.
The user can perform the following local operations on the World Map HD Net:
• Turn On/Off the Remote Monitor
• Control the Remote Monitor display backlight; it is possible to select the desired backlight
on the Remote Monitor display without interfere with the Master Chart Plotter display
backlight.
For World Map HD Net installation and removing refer to the Par. 6.2 "Installation
and Removing". For the connection to the Master World Map HD Pro refer to the External
Connections picture in the Par. 2.4. See the World Map HD Net User Manual for more
information.
5.14.1 REMOTE MONITOR SETUP
After system power On, to enter the Remote Monitor Setup press and hold down
'MENU' and at the same time press 'POWER' (when pressing 'POWER' a beep sounds).
On the screen the Remote Monitor Setup, the OSD menu, appears.
Input Menu
Resolution:
Firmware Version:
800x600 59.6Hz
56xxFW REL19 DM13b
Fig. 5.14.1 - OSD Menu
Using the cursor key right/left or 'ZOOM IN'/'ZOOM OUT' selects the desired
menu for adjusting setting and press 'ENTER'.
The OSD menu allows to select 5 sub-menu, from left to right the Input menu, the
Contrast/Brightness menu, the Color menu, the Image menu and the Tool menu.
After setting desired adjust, to exit from the OSD menu wait a few seconds (the
default timeout is 15 seconds) without press any key, the OSD menu disappears from the
screen. Also it is possible to exit from the OSD menu using the "Exit" function and press
'ENTER'. After a few seconds the keyboard starts to control the chart plotter.