Operation Manual

109
User Manual
This page allows you to:
Goto
Activates navigation to the selected PTX. Once the navigation has been activated, close all
menus/data pages (if open) and center the chart selected PTX.
Delete
Deletes the selected PTX.
Show
Centers the chart on the selected PTX.
Show All
Selects the best chart scale to see PTX icons on the map at the same time.
5.11.4.4 Show PTX
The Show function is available when PTX has been received again, it is already
present on the chart plotter memory and it is the active one.
To select this function press 'ENTER', using the cursor select "SHOW" and press
'ENTER' to close all menus/data pages (if open) and center the chart on the received PTX.
5.12 FISH FINDER MENU
The chart plotter combined with the sonar performance of the Fish Finder is one
of the most advanced marine navigation system available.
'MENU' + "FISH FINDER" + 'ENTER'
For more information see the specific User Manual.
Note
The Fish Finder display page is available only if the Fish Finder is connected and powered On.
5.13 RADAR SETUP MENU
The Radar consists of a scanner unit which illuminates targets with microwave
energy and then collects the echoes from those targets. The scanner unit includes the Radar
antenna, transmitter, receiver and necessary electronics. The scanner unit is connected to a
chart plotter equipped with software capable of displaying the Radar functions. To select
the Radar menu, first select one of the four page related to the Radar: