Operation Manual

108
User Manual
MOBILARM - PTX
OVERBOARD
41°13.334N
009°30.702E
Id Time
000001A0
10:16:79 PM
Fig. 5.11.4 - Example of PTX information window
5.11.4.1 Deleting PTX
The Delete PTX function permanently removes the selected PTX from the chart
plotter memory and from the chart display.
Move the cursor over the PTX to delete. Press 'ENTER', using the cursor select
"DELETE" and press 'ENTER'. A warning pop-up window will be shown. Select "YES"
and press 'ENTER'.
5.11.4.2 Goto PTX
The Goto PTX function activates the navigation to the selected PTX.
Place the cursor on PTX cursor. Press 'ENTER', using the cursor select "GOTO"
and press 'ENTER'.
If the navigation is set to the selected PTX, to terminate the navigation press 'EN-
TER', using the cursor select "STOP GOTO" and press 'ENTER'.
5.11.4.3 MOBILARM PTX List Page
The MOBILARM Alarm Status List shows the list of all PTX that returned an
alarm event. To obtain the page press 'ENTER', using the cursor select "LIST" and press
'ENTER'.
03:45:14 PM
10:31:24 PM
213°22.120W
305°04.015W
20°01.022N
79°56.320N
RECOVERED
Recovered
Recovered
PTX indentifier
Time of PTX creation
PTX position
PTX status
MOBILARM-Alarm Status List
Fig. 5.11.4.3 - Example of MOBILARM PTX List page