Operation Manual

107
User Manual
Fig. 5.11.3.1 - PTX icon
All menus and/or pages are closed and the chart is centered on the PTX received
position. The Audible Alarm starts beeping and a pop-up warning window appears to no-
tify that a PTX has been received:
MOBILARM
33°27.090N
220°34.020W
Id Time
000001A0
10:16:29 PM
Fig. 5.11.3.2 - Example of PTX warning message
It is possible to navigate to the received PTX (see Par. 5.11.4.2) and open the
MOBILARM PTX List Page (see Par. 5.11.4.3). Both Goto and List functions also mute the
Audible Alarm.
Note
The List function is active if more than one PTX is store.
5.11.3.2 PTX is received again
When PTX has been received again, it is already present on the chart plotter memory.
If the received PTX is NOT the active one, the user must confirmed to navigate to
it.
Otherwise if the received PTX is the active one (the PTX on which we are navigat-
ing to), navigation data are updated in memory, the new PTX coordinates becomes the
Destination position and the current Fix position becomes the starting position. The map is
not automatically centered on it.
The PTX icon appears at the new position and a pop-up warning window appears.
It is possible to close all menus/data pages (if open) and center the chart on the received
PTX (see Par. 5.11.4.4). Otherwise you could close the alarm window and stay on the active
screen.
5.11.4 MOVING CURSOR ON THE PTX ICON
Placing the cursor on the PTX icon shown on the screen, an information window
containing the PTX Identifier, position and status (Overboard or Recovered) appears: