Operation Manual

105
User Manual
information is displayed:
• Vessel Name/MMSI Number
• Position
• Date and Time
• Distance and Bearing from current vessel's position
Pressing 'ENTER' it is possible, by selecting "DELETE" deletes the DSC icon
from the DSC Log page, otherwise by selecting "DSC LOG" the DSC Log page is shown.
5.11 MOBILARM SYSTEM
The MOBILARM is an automated crew monitoring system dedicated to monitor-
ing onboard crew by maintaining a constant link between the crew member and the boat.
The instant a man overboard event happens, an automatic alarm is sounded, and the vessels
position is logged.
Connect the MOBILARM System to a serial port of the chart plotter.
5.11.1 SOFTWARE SETUP
After connections have been made, the chart plotter has to be setup to be able to
receive NMEA information from the MOBILARM. When a MOBILARM is connected to
the chart plotter, any input port of the NMEA Input/Output menu must be changed to
MOBILARM as shown below for communications.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' + se-
lect any input port you want + 'ENTER' + "MOBILARM" + 'ENTER'
The chart plotter continuously verifies the communication status with MOBILARM
instruments. If there is no communication for more than one minute, an alarm window
appears.
5.11.2 MOBILARM STATUS
If you want to know information about the MOBILARM connected, follow the
procedure:
'MENU' + "About" + 'ENTER'