Operation Manual

93
User Manual
5.3.2 FIX DATUM
Selects the Fix Datum among 130 items. WGS-84 is the default Fix Datum.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "NAVIGATE" + 'ENTER' +
"FIX DATUM" + 'ENTER'
5.3.3 MAP DATUM
Selects the Map Datum among 130 items. WGS-84 is the default Fix Datum.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "NAVIGATE" + 'ENTER' +
"MAP DATUM" + 'ENTER'
5.3.4 ORIENTATION RESOLUTION
Selects the orientation of your chart according to your personal needs (see Par.
3.5.1.3 for more information). The Orientation Resolution is the resolution angle for the
Map Orientation, range [5°, 60°] . The default setting is 10°.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "NAVIGATE" + 'ENTER' +
"ORIENT. RESOLUTION" + 'ENTER'
5.3.5 SELECTABLE NAV 3D
If the "Selectable Nav 3D" item is set ON, by pressing '<MODE>' it is possible to
select the following modes: Charting, Navigation (Home), Navigation (Home) in 3D, Charting
in 3D. Any time the key is pressed, a message describing the newly selected mode is shown on
the center of the screen for about 2 seconds.
If the "Selectable Nav 3D" item is set OFF, by pressing '<MODE>' it is possible to
select Charting or Navigation (Home). The default setting is On.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "NAVIGATE" + 'ENTER' +
"SELECTABLE NAV 3D" + 'ENTER'
5.3.6 ROLLING ROAD SCALE
Sets you preferred Rolling Road Scale among 0.2, 0.5, 1.0, 2.0, 4.0, 10.0. The default
setting is 0.2.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "NAVIGATE" + 'ENTER' +
"ROLL ROAD SCALE" + 'ENTER'
5.3.7 RESET TOTAL AND PARTIAL TRIP
Resets the partial or total distance travelled by the ship from the first activation of
the chart plotter or starting from the values reset. The partial or total trip value is shown on
the top of the Navigation Data page.