Operation Manual

86 User Manual
The C-Link Navigation Data are deleted at Power Off.
4.8.1.5 C-Link Navigation Data: acquisition and display
As soon as the C-Link Navigation Data is received, the Slave parses the information
received and executes the relative actions depending on its current working status.
Important
When the navigation to the external destination is activated, the Slave chart plotter will show all relevant C-Link
Navigation Data exactly like when the destination is not the external one: (Destination Name, DST and BRG to
Destination, calculate XTE, calculate TTG etc.). These values will be displayed all places where required and they will
be used to format NMEA-0183 output data.
4.8.1.6 Graphical representation on Map Display
Fig. 4.8.1.6 - Graphical Displaying
4.8.1.7 Route Data Report
When the navigation to the External Route is received, it will be possible to display the information
related to the External Route by entering the Route Data Report.
Fig. 4.8.1.7 - External route on Route Data Report
• External Route : name of the External Route (from PCMPN,0)
• Cruising Speed : planned cruising speed (from PCMPN,1)
• Fuel Consumption Rate : planned fuel consumption rate (from PCMPN,1)
• Total Route length Route : length from first to last Wpt (from PCMPN,1)
• Initial Fuel Load : volume of fuel available before the navigation was