Operation Manual

82 User Manual
4.6.3 DELETING FILE
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "USER C-CARD" + 'ENTER' +
"DELETE" + 'ENTER'
A warning window is shown, select "YES" and press 'ENTER' to confirm deletion
(select "NO" otherwise). This operation remove old or unnecessary files to clean up your
User C-CARD. Remember that this option permanently erases the file.
4.6.4 FORMATTING USER C-CARD
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "USER C-CARD" + 'ENTER' +
"FORMAT" + 'ENTER'
A warning window is shown, select "YES" and press 'ENTER' to confirm the
formatting (select "NO" otherwise). The format of User C-CARD must be done before
using a new User C-CARD: this operation prepares the User C-CARD to receive and store
information.
4.6.5 CHANGING USERC-CARD
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "USER C-CARD" + 'ENTER' +
"CHANGE" + 'ENTER'
Allows to change the User C-CARD.
4.7 C-LINK
C-Link system is a feature which allows to sharing the same cartographic data
between two chart plotter units linked via serial I/O port.
In order to activate C-Link function, a “MAX data C-CARD” (called REGULAR
C-CARD) must be inserted into one of the two chart plotters and a special MAX data C-
CARD (called MIRROR C-CARD) must be inserted on the other chart plotter. The two
MAX data C-CARDs must have the same code and revision. So, the MIRROR C-CARD
can be utilized only on a chart plotter linked to another chart plotter provided with the
equivalent REGULAR C-CARD. It is important to point out that the two chart plotters
must have the update software versions that allow C-Link function.
4.7.1 HOW C-LINK SYSTEM WORKS
When the chart plotter is powered up, it switches into the “Stand-Alone Mode”. In
this work mode, the chart plotter unit periodically scans all the available C-CARD slots