Operation Manual

78 User Manual
two points the information window appears. Press 'ENTER', select "DELETE ALL" and press
'ENTER' again: all points and connecting segments are deleted.
4.4.4 MOVING THE A-B-C-D POINTS
When placing the cursor on the desired point (A, B, C or D) the information window
appears. Press 'ENTER', select "MOVE" and press 'ENTER': by the cursor key move the
cursor, on the screen a dotted line connecting the point to move with the new position appears.
By pressing 'ENTER' the point is placing in the new position.
4.4.5 INSERTING THE A-B-C-D POINTS
Placing cursor on the segment connecting two points, the information window
appears. Select "INSERT" and press 'ENTER': by the cursor key move the cursor, on the
screen a dotted line appears. By pressing 'ENTER' the new point is placing between the two
existed points which are renamed.
4.4.6 NAVIGATING ON THE A-B-C-D POINTS
If fix received is good, place the cursor on the desired point A, B, C or D and press
'GO-TO'. When ship reaches the Destination point, navigation follows the next point (if
exists). When Target is set, three options are available: STOP NAV, NEXT and PREV.
4.5 USING THE TRACK FUNCTIONS
The chart plotter can be set up for recording your track as you move and for
plotting this track on the chart.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER'
4.5.1 SELECTING ACTIVE TRACK
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' + "AC-
TIVE TRK" + 'ENTER'
Select the number of the active track. The default setting is 1.
4.5.2 ENABLING TRACK STORING
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' + "TRACK"
+ 'ENTER'