Operation Manual

User Manual

4.3.2 DELETING EBL & VRM

Select Advanced Mode + Place cursor on the cross EBL & VRM + 'ENTER'

Select "DELETE" and press 'ENTER': the line and circle disappear from the screen.

4.3.3 EDITING EBL & VRM

Select Advanced Mode + Place cursor on the cross EBL & VRM + 'ENTER'

Select "EDIT" and press 'ENTER': with the cursor key move the line and the

circle, when the desired position is selected, press 'ENTER'. A window is shown containing

the bearing value for the EBL and the radius value for the VRM.

4.4 MORE ABOUT A-B-C-D FUNCTION

The A-B-C-D function, explained in the previous paragraph 3.3, if Advanced Mode

is selected, allows you not only to create the A, B, C, D points and to delete them, but also

to modify and move them.

4.4.1 INSERTING THE A-B-C-D POINTS

Place the cursor on the desired position and press 'ENTER': the Create window

appears, by using the cursor key select "A-B-C-D" and press 'ENTER'; or press 'A-B-C-D'

(if it is present): the A point and an information window on A appear. Move the cursor,

press 'ENTER', select "A-B-C-D" and press 'ENTER' again or 'A-B-C-D' (if it is present):

the B point appears, connected to A with a straight segment; an information window on A-

B segment (distance (DST), bearing (BRG) and total distance from the first point) appears.

Moving the cursor, pressing 'ENTER', selecting "A-B-C-D" and pressing 'ENTER' or 'A-

B-C-D' (if it is present) places the C and D points (see previous Fig. 3.3.1).

4.4.2 DELETING THE A-B-C-D POINTS

When placing the cursor on the desired point (A, B, C or D) the information

window appears. Press 'ENTER', select "DELETE" and press 'ENTER' again: the point is

deleted. When the point is deleted, the cursor is placed on the previous point, if existed.

The labels of the next points are renamed.

4.4.3 DELETING THE A-B-C-D SEGMENT

When placing the cursor on the desired point (A, B, C or D) or on segment between