Operation Manual

76 User Manual
4.2.2.5 Finding information on Events: User Points List page
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "USER POINTS" + 'ENTER'
A full window is opened showing information about all stored User Points (Marks,
Events and Waypoints). Move up/down the cursor key to select the User Point you wish. If
the page contains more than 8 User Points, the list continues in the next pages. See Par.
4.1.1.9.
4.2.2.6 Add to Route
Place cursor on Event
Press 'ENTER'. Select "ADD TO ROUTE" and press 'ENTER': the selected Event
is connected to the current route. The same Event can be added in many routes.
Note
An existing Event can be connected to the current route in another mode too. Place cursor on Event, the information
window related to the Event appears, press 'CLEAR' to close the window and then press 'ENTER', select the
Waypoint option and press 'ENTER'. The Event is connected to the current route.
4.3 EBL & VRM FUNCTION
EBL & VRM function enables to create a dotted line and a circle respectly with
direction and radius determined by the user.
4.3.1 PLACING EBL & VRM
Select Advanced Mode + 'ENTER' + "EBL & VRM" + 'ENTER'
or:
'EBL-VRM' (if it is present)
On the screen a dotted line and a circle appear: you can move in any direction you
choose rotating the trackball. When the desired position is selected, press 'ENTER'. A
window is shown containing the bearing value for the EBL and the radius value for the
VRM.
Fig. 4.3.1 - EBL & VRM