Operation Manual

User Manual

4.2.2.1 Adding Event

Select Advanced Mode + 'MODE', then 'ENTER' + "EVENT" + 'ENTER'

or:

'EVENT' (if it is present)

An Event is placed directly on the ship's position.

4.2.2.2 Deleting Event

Place cursor on Event

Press 'ENTER'. Select "DELETE" and press 'ENTER': the Event remains on the

screen shaded until the next screen is redrawn.

Note

If you try to delete a Event that belongs to many routes, the chart plotter emits three beeps and on the screen a Warning

message appears. If you want to delete the Event, press 'ENTER'.

4.2.2.3 Goto

Place cursor on Event

Press 'GO-TO': a circle encloses the Event symbol. A straight line is shown on the

screen connecting the Target with the ship's position. When the Target is placed, all navigation

data are referred to this Target.

4.2.2.4 Editing Event

Place cursor on Event

Press 'ENTER'. Select "EDIT" and press 'ENTER'. A window appears to modify

Name, Symbol, Color of the existing Event.

Fig. 4.2.2.4 - Edit Event

Use the cursor key to select the field. If you have selected Name field, press 'ENTER':

use the cursor key to insert the character (8 characters max), then press 'ENTER'. If Color

field is selected press 'ENTER': a window with 8 different colors appears, use the cursor

key to select the desired color and press 'ENTER'. If Symbol field is selected press 'ENTER':

a window with 16 different symbols appears. Use the cursor key to select the symbol and

press 'ENTER'. Then press 'CLEAR'.