Operation Manual

74 User Manual
Fig. 4.2.1.5 - Edit Mark
Use the cursor key to select the field. If you have selected Name field, press 'ENTER':
use the cursor key to insert the character (8 characters max), then press 'ENTER'. If Symbol
field is selected press 'ENTER': a window with 16 different symbols appears. Use the cursor
key to select the symbol and press 'ENTER'. If Color field is selected press 'ENTER': a
window with 8 different colors appears, use the cursor key to select the desired color and
press 'ENTER'. If Coordinates field is selected, press 'ENTER' and then use the cursor
key to insert the value. Then press 'CLEAR'.
4.2.1.6 Finding information on Marks: User Points List page
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "USER POINTS" + 'ENTER'
A full window is opened showing information about all stored User Points (Marks,
Events and Waypoints). Move up/down the cursor key to select the User Point you wish. If
the page contains more than 8 User Points, the list continues in the next pages. See Par.
4.1.1.9.
4.2.1.7 Add to Route
Select Advanced Mode + Place cursor on Mark
Press 'ENTER'. Select "ADD TO ROUTE" and press 'ENTER': the selected Mark
is connected to the current route. The same Mark can be added in many routes.
Note
An existing Mark can be connected to the current route in another mode too. Place cursor on Mark, the information
window related to the Mark appears, press 'CLEAR' to close the window and then press 'ENTER', select the
Waypoint option and press 'ENTER'. The Mark is connected to the current route.
4.2.2 EVENTS
In Navigate mode you may place a location with an Event symbol and number,
directly on the ship's position. Move the cursor to exit from Navigate mode; place the
cursor on an Event to access the following functions.