Operation Manual

User Manual

• Land Areas

• Shallow Water

• Intertidal Areas

• Rocks

• Wrecks

• Obstructions

• Shoreline Constructions

• Fishing Facility

• Dreged Areas

• Diffusers

• Mooring/Warping Facility

• Production Installation

• Pingos

• No Data Available

If any of these alarm conditions is detected, the function returns the list of dangerous

objects and the relative dangerous route leg, that is drawn with a different color.

To activate this function:

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' + "AU-

TOMATIC CHECK" + 'ENTER' + "ON" + 'ENTER'

Note

If Automatic Check is enabled, anytime you append or insert a new Waypoint, delete, move or edit any Waypoint,

the Route is checked. Only the modified Route legs are checked.

To select the width of the detected area aside the route:

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' +

"ROUTE WIDTH" + 'ENTER'

Note

Safe Route width value represents half the total width checked by the function.

To select the depth of the detected area aside the route:

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' +

"ROUTE DEPTH" + 'ENTER'

It also possible to select the accuracy for the route check, among Very Low, Low,

Medium, High and Very High:

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' + "AC-

CURACY" + 'ENTER'

The list of the dangerous objects found on the charts crossed by the route is

shown in the route check report, follow the procedure: