Operation Manual

70 User Manual
Note
If there is the Target in the current route, it is not possible to change the current route. So if the "Route #" item
is selected, the chart plotter emits three beeps.
Changing Speed & Fuel values
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' + "ROUTE
REPORT" + 'ENTER'
It is possible to modify the Speed and Fuel consumption values, respectively by selecting
"SPEED" and "FUEL". Insert value by using the cursor key and pressing 'ENTER'.
Reversing route
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' + "ROUTE
REPORT" + 'ENTER' + "REVERSE" + 'ENTER'
Reversing a route plan is most typically used to return to the point where the route originally
started. See also Par. 4.1.2.3.
Deleting route
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' + "ROUTE
REPORT" + 'ENTER' + "CLEAR" + 'ENTER'
A window is opened: select "YES" and press 'ENTER' to confirm (select "NO" and press
'ENTER' otherwise). The route remains on the screen shaded until the screen is redrawn.
To delete the route see also Par. 4.1.1.4 and 4.1.2.2.
4.1.2.6 Route Name
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' + "ROUTE
NAME" + 'ENTER'
Use the cursor key to insert the route name (max 16 alphanumeric char.).
4.1.2.7 Send/Receive route
To transmit the Active route information onto the NMEA output port.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' + "SEND"
The NMEA WPL & RTE messages are sent to the output port.
To save route information received from the NMEA input port.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' +
"RECEIVE"
The received route is saved on the Active route, overwriting it. The NMEA WPL &
RTE messages are sent to the input port.
4.1.2.8 Safe Route Checking
This function checks the presence of particular cartographic objects (see the list below) on
a range set by the user for all route legs: