Operation Manual

67
User Manual
Fig. 4.1.1.8a - Edit Waypoint (II): Waypoint symbols
Use the cursor key to select the symbol and press 'ENTER'. If select Coordinates
field, press 'ENTER' and then use the cursor key to insert the value. Then press 'CLEAR'.
Fig. 4.1.1.8b - Edit Waypoint (III)
4.1.1.9 Finding information on Waypoints: User Points List page
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "USER POINTS" + 'ENTER'
Move up/down the cursor key to select the User Point you wish. If the page contains
more than 8 User Points, the list continues in the next pages.
Finding User Points
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "USER POINTS" + 'ENTER' +
"FIND' + 'ENTER'
The chart plotter exits from the User Points List page and redraws the chart. The selected
point appears, with the cursor placed on it.
Deleting selected User Point
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "USER POINTS" + 'ENTER' +
"CLR-ONE' + 'ENTER'
Deletes the selected User Point. A warning message appears, select "YES" and press 'ENTER'
('CLEAR' otherwise).